top of page

Forum Posts

nkatariya
May 30, 2022
In Everything for MoCA
I finally got my two adapters (MA2500D) working a few weeks ago. I decided to add a third and it has been a nightmare. Couldn't get the moca light to come on and then stumbled on disconnecting my mini cable box. When I reconnected the cable box it would not get the correct signal from the main dvr which is working well. Also the third adapter does not seem to show up on my network properly. I cannot seem to login to it/identify the correct IP address. I logged into the other two and this is what I see. I have POE filter at the main line coming in and one from the splitter going to the cable modem. My network seems to be all from from a single line that splits to three rooms. I cannot see the splitters as they are in the wall/attic but the network seems to be reaching the right speeds near 900mbps. It seems that the mini cable box competes with the 3 MOCA adapter for the signal and not sure if I can add another filter somewhere to help with this. Please advise. Please help lol
Mini Cable Box Interfering with new adapter content media
0
4
76
nkatariya
Apr 29, 2022
In Everything for MoCA
I just purchased two MA2500D, followed the correct topology, placed a POE filter at the line coming in. I did the IP address static setup for each unit as well. However, neither seem to adopt an IP address when plugged into the router or on the other end. Also I tried to download the firmware upgrade but the file seems corrupt. I am using a Mac, with tp link Omaha EAP's, switch, and an arris surfboard s33. Would appreciate any advice. Thanks
0
30
212

nkatariya

More actions
bottom of page