I was able to get two devices (WF-803M) connected and ideally want to run one to a new mesh unit with wired/Moca backhaul.
Everything seems to be working at first until the signal will randomly die. This was causing major issues for my mesh point (Synology) and eventually I tried just plugging in another computer directly... Again it is working great until it randomly disconnects a few hours later and needs to be reset to re-establish connection.
Is there anything that I can try to debug this issue? It has been incredibly frustrating.
I just swapped this:
https://www.amazon.com/gp/product/B00CUIUOWO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
For this:
https://www.amazon.com/gp/product/B07TV2LZCP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Which I am guessing should help?
Here's my link status for the two devices in the admin:
Main causes are slow or Inconsistent Speeds
Possible Causes:
Outdated firmware.
Low signal strength.
Network congestion.
Solutions:
Upgrade firmware to the latest version.
Verify signal strength through the adapter's web interface.
Reduce network load by limiting the number of devices.
3. Adapter Not Connecting
Possible Causes:
Incorrect IP configuration.
Hardware failure.
MoCA filter issues.
Solutions:
Check for static IP conflicts.
Replace the failing adapter if necessary.
Verify the presence of a "PoE" MoCA filter to secure and enhance signal reflection.