Hello, I am having trouble connecting my two WF-803Ms with and Xfinity XB3 gateway. The gateway supports bonded Moca 2.0 and had limited setting (Channel is unmodifiable but listed as using D1 (1150 Mhz) and with the preferred network controller setting to enabled). The gateway does not detect the WF-803Ms, and the WF-803M cannot see the gateway. Interestingly, when I remove the gateway and connect the same coax to a WF-803M, the WF-803M will see each other and establish a Moca 2.5 connection. Is there something just incompatible with the XB3 gateway and the WF-803M? I flashed both to the newest firmware (v1.0.14) and no change - can't see the gateway but will connect to each other. Tried restarting the gateways and WF-803Ms numerous times and played with the preferred network controller setting to no avail. I need three locations with network access, which is why I am trying to use the Moca capabilities of the gateway for the third (instead of buying another adapter) even through I know speeds will be at Moca 2.0 levels.
Any suggestions. All splitters are Moca certified.
When setting up the Xfinity XB3, it seemed like everything would run smoothly. However, connecting it to my MoCA network turned into a headache with constant connection drops. After trying multiple solutions, I decided to contact https://xfinity.pissedconsumer.com/customer-service.html . Their team jumped right into action, asking detailed questions and providing tailored troubleshooting steps. With their help, I got the issue resolved, but it made me realize how crucial it is to have responsive support when dealing with tech setups.