I have two of these that I previously upgraded from 22.214.171.124 to 126.96.36.199, however I'm unable to upgrade to 188.8.131.52. During the upgrade process, I choose the 1.0.13 file, press Upgrade, and it just spins for 10 minutes or more. If I reboot the unit or reload the page, it still shows 1.0.12.
I did see the release notes on 1.0.13 where this appears to be fixed, but how can I apply 1.0.13 if the web update doesn't work?
I was able to boot into the backup image (1.0.6) using this procedure: https://www.gocoax.com/forum/main/comment/60dfb15a442a3100156a90a6 , however the upgrade still doesn't work. Obviously it did work before because I was able to get 1.0.12 installed.
Is there a way up apply a firmware without using the web interface? I'm not afraid of TFTP or other things like that if needed.
I was successfully able to update to 1.0.13 by booting into the backup image (1.0.6), and then using the Chrome browser to upload the 1.0.13 file.
Only with latest firmware, the chip vendor fixed the broswer compatible issue.
For what it's worth, I was able to upgrade my WF-803M which I recently purchased from 1.0.6 to 1.0.13, using Google Chrome as my browser.