To see this working, head to your live site.

More than two goCoax don't work?

So I purchased three goCoax 2.5 GB from Amazon Spain. I'm trying to plug in the third goCoax to work.

The first two goCoax work flawlessly Master - Bedroom1 (BR1). But when connecting the Bedroom2 (BR2) the goCoax in BR1 and BR2 will only work one at a time?

If BR1 is unplugged BR2 works flawlessly.

So when both BR1 and BR2 are connected they one gets a connection with the router (Master) at a time. I've switched the goCoax to use DHCP and then from the router locked them IP addresses to each goCoax - this hasn't help resolving the problem :-(

How do I get multiple nodes to co-exist at the same time?

Cheers, Anders

3 answers0 replies

Comments (3)

Commenting on this post isn't available anymore. Contact the site owner for more info.

Unknown member

Oct 29, 2024

Finally I got it working. So there are two circuits, one for 1 Radio and 2 TV, it turns out the two circuits were crossed between each other. I'm using the 1 Radio curcit. So the last node BR2 connected to the Master router through node BR1. When this happened the connection from BR1 was lost whilst BR2 worked, and when BR1 regained its connection BR2 lost its. So they were switching between each other.

Cheers, Anders

Edited