I am currently installing the goCoax MoCA 2.5 adapter device, and have so far only been able to make it through step four (Check Power LED is green/solid, LAN LED is green/blinking). On step 5, the MoCA LED does not come on. I have read on a couple other threads on here that I should check any splitters to make sure they support MoCA, which they do, so I have no clue what to do next to troubleshoot this. I am including photos below of the MoCA device Frontier originally set me up with, the 8-way splitter and 2-way splitter currently in my setup, as well as the Coax splice device I am using to make sure I am not overlooking something being incompatible.
It sounds like you’ve done a thorough job checking your splitters and setup for MoCA compatibility. Sometimes, the MoCA LED won’t come on if there’s a signal issue or if the coax cables aren’t properly connected. You might want to try swapping out the cables or testing each segment individually to isolate the problem. By the way, blood money game is an interesting topic I came across recently. If you continue to have trouble, reaching out to goCoax support or checking their forums for similar issues could help. Here’s a useful link: https://www.bloodmoney-game.online/