I just bought (3) MA2500D's and everything is working great. I was wondering if there is documentation on how to change the Moca channel frequencies. I have a Spectrum Cable Modem that runs 1218 MHz. I want to make sure the default settings are not conflicting with the upper end of my modem.
top of page
To test this feature, visit your live site.
How do you Change Channel Frequencies MA2500D
How do you Change Channel Frequencies MA2500D
3 answers0 replies
Like
Comments (3)
bottom of page
With each guess, Worldle gives you distance clues to guide your next move, making it a game of strategy and geographic knowledge.
Is it even possible to get a POE or MoCa filter for 1218Mhz? I've only found ones for 1002Mhz, and nearly all are unlabeled entirely.
You can follow these stps to change the MoCA band to D-band High.
• Set a fixed IP to your computer, such as 192.168.254.10. You can follow the guide to configure the fixed IP.
https://pureinfotech.com/set-static-ip-address-windows-10/
https://www.macinstruct.com/node/550
• Connect your computer to the LAN port of MoCA adapter via ethernet cable.
• Visit http://192.168.254.254, username is admin, password is gocoax.
• Go to the ‘MoCA Settings’ page
• Deselect ‘D-Ext’ and ‘D-Low’, only keep ‘D-High’, save the configuration.
• Reboot the device,
Note: In this way, you only changed the MoCA working band. There is no hardware band filter. May still have some interference. The best way is to add special POE filters(up to 1218MHz) into the coaxial network. to seperate the Cable modem and MoCA