I have 5 WF-803M devices that are less than 8 months old and have worked well with no issues until today.
One device stopped connecting to moca. I did a coax cable test and cable passes fine, no faults.
I then tried connecting this device to another device using short coax cable and the moca lights came on, even swapped the devices at the coax outlet and no moca light.
I returned the device I took from another coax outlet to test with back and hooked it up and the moca light would no longer come on. So now I have 2 of 4 with no moca light.
All of my coax cables in the house are connected to an Antronix MVRA902B moca amplifier. I unplugged and plugged it back in and no change.
I swapped one coax with another and the moca devices still did not light up.
Even after doing that and switching the coax cable connections back to original spot the working device (moca light green) is now not working, only lan and pwr light are green. So 3 of 5 devices now are not working (no green moca).
I have reset and power cycled these 3 non-working devices
Any help would be appreciated!
So you've decided to travel to Australia, but you're not sure when to go? Don't freak out! We'll show you when the best time to visit Australia is in this blog post so you can make the most of your vacation. The best time to visit Australia is determined by where you want to go and what you want to see. Australia is the world's largest country, having a wide diversity of climates. Northern Australia experiences a tropical climate with hot, humid summers and wet, dry winters, whilst southern Australia experiences a warmer climate with mild, rainy winters. So, when planning a trip to Australia, think about the best time to go based on where you want to go to get the most out of your trip. Please let us know if you have any great Australian destinations on your bucket list in the comments section below so we can suggest the Best Time to visit Australia. Otherwise, consult the table below to learn about the finest sites to visit in Australia and the best times to visit. Take a look at our Finest Time to Visit Australia ideas, which are based on the best areas to visit in the country.
I did that this morning - connected them and moca light does come on for all three.
To clarify above statement once I unplugged one of the working ones to test on the coax cable or connect to the one that was not working these two stopped working after that when I returned them to their original spot / coax connection.
Please let me know what else to look at.
For the 3 non-working devcies, could you try to connect them directly with a short coaixal cable and check the MoCA link?